In order to install Windows on a new PC, the OS has to be formatted and then loaded from an optical disc. However, in some cases this process fails with an error that prevents your computer from booting up properly or even turning on at all. These errors are caused by one of two things: either you skipped too many steps during the initial installation phase, refusing to format it as needed, or you have installed something incompatible with your hardware because it wasn’t compatible when you bought it (like Linux).
The “the installation failed in the safe_os phase with an error during boot operation windows 11” is a problem that has been present for a while. Microsoft has released a fix to fix the issue.
Ivan Jenic’s contribution
Expert in Troubleshooting
Ivan has dived deep into knowing this operating system, with a specialize in drivers and driver problems, thanks to his passion for all things Windows and his natural curiosity. When he isn’t tackling, he is… Continue reading
Updated on November 18, 2021.
Publish date: September 2020
- Some settings may be incorrect if you get an error when attempting to install Windows in the safe OS phase.
- There are various options for resolving this, and we’ll walk you through each one.
- The Windows operating system is vulnerable to a variety of functionality faults, which we’ve examined extensively in the Errors Hub.
- Visit our Troubleshooting section for answers to more general problems.
BY CLICKING ON THE DOWNLOAD FILE, YOU CAN INSTALL XINSTALL.
We propose Restoro PC Repair Tool to address a variety of PC issues: This program will fix common computer faults, protect you against file loss, viruses, and hardware failure, and optimize your PC to run at its best. In three simple actions, you can immediately fix PC problems and eradicate viruses:
- Download the Restoro PC Repair Tool, which includes patent-pending technologies (patent available here).
- To detect Windows faults that may be causing PC difficulties, click Start Scan.
- To correct problems that are hurting your computer’s security and performance, click Repair All.
- This month, 0 readers have downloaded Restoro.
Although upgrading to Windows 10 is free for most Windows 8 and Windows 7 users, it isn’t always as simple as you may assume.
Users claim to be receiving While attempting to upgrade to Windows 10, the installation failed in the safe os phase with an error during the apply image process.
This mistake may manifest itself in a variety of ways, such as during the installation of:
- environment conducive to rehabilitation
- make a rollback plan
- operation replicate oc
- operation migrate data
- first boot
The following are examples of particular problems that may occur during installation:
We’ve attempted to address all of these issues in this post. Because operating systems operate differently, we recommend that you try each approach one at a time until you discover the perfect answer.
What should I do if the safe OS part of the installation fails?
1. Make sure all your drivers are up to current.
If you have any difficulties with your drivers, the warning Installation Failed in Safe OS Phase With an Error During Apply image Operation may display, according to users.
This issue may be caused by out-of-date drivers, therefore it’s a good idea to update them.
Many people, for example, claimed that the issue was caused by their USB drivers. The problem was fixed when they were updated.
Other old drivers, on the other hand, might create this issue. As a result, we strongly suggest using DriverFix, a third-party solution for finding and updating all necessary drivers.
The utility searches your system after it’s been installed and run, looking for any troublesome drivers. It also provides trustworthy suggestions for the most recent software versions that you may install without risk.
Furthermore, this is not a one-time use tool. It will undoubtedly come in helpful in the future.
DriverFix
Consider how much time you’ll save by letting this utility update all of your system drivers.
2. Upgrade to Windows 10 from a previous version.
This is a more involved method since it involves changing Windows 10 setup files. This method may be beneficial to certain people, but be sure to carefully follow the instructions to avoid any harm or undesirable complications.
The KB3064209 Intel CPU microcode upgrade is the major source of this problem. This does not apply to you if you do not utilize an Intel processor.
This has been tested on Gigabyte GB-BXi3-4010 motherboards with an Intel i3 4010U CPU installed, but we expect it to work on any other Intel-based motherboard.
The file C:/Windows/system32/mcupdate genuineintel.dll is updated by KB3064209.
This file must be deleted in order to install Windows 10. Follow the steps below to do so (we’ll use X: for the USB drive, C: for the operating system drive letter, and User for the user profile name). Make careful to update them to reflect your settings when using this solution.)
- Copy the contents of the Windows 10 ISO to a USB stick.
- As an administrator, open Command Prompt.
- Make a new folder called mount on your Desktop.
- Enter the following command into Command Prompt to mount and modify WIM (Image file:boot.wim, Index 1):
- /Mount-Image /Image dism /Mount:X:sourcesboot.wim /index:1 Dir:C:UsersUserDesktopmount
- Navigate to the following locations using Windows Explorer:
- C:/Users/User/Desktop/mount/Windows/System32/mcupdate GenuineIntel.dll
- Choose Properties from the context menu when you right-click mcupdate GenuineIntel.dll.
- Select Advanced from the Security tab.
- Then, set your User account as the Owner. (Log in to your account and choose the Check Names option.) To save your changes, click OK.)
- To add your user account, go to the Security tab and select Edit, then Add. (Make sure Full Control is checked so you have the most rights.) To save your changes, click Apply and OK.)
- mcupdate GenuineIntel.dll should now be deleted.
- All open Windows Explorer windows should be closed.
- Return to Command Prompt and unmount the image with the command:
- /MountDir:C:UsersUserDesktopmount /commit dism /Unmount-Image /MountDir:C:UsersUserDesktopmount
- Steps 4-11 must now be repeated for the following files:
- /index:2 boot.wim
- /index:1 install.wim
- /index:2 install.wim
- If you’re unsure, just substitute the values from the list above for boot.wim /index:1.
- Remove the USB and start the installer after deleting the mount folder from your desktop.
Because this is a complex solution, make sure to carefully follow the directions on the screen in order to complete it correctly.
3. Make use of a third-party uninstaller
During the Apply image phase of the installation, the Safe OS phase failed with an error. Temporary files might cause an operation issue, and uninstalling them totally is one solution.
To do so, it’s a good idea to delete any harmful files or applications from your computer.
Still, if you have residual files on your system, utilizing Windows Control Panel may not be very helpful.
And here is when uninstaller software comes in, eliminating any harmful files from the computer completely. So, utilizing the finest uninstaller software on the market right now, you may attempt to solve this mistake.
Expert Tip: Some PC problems, such as damaged repositories or missing Windows files, are difficult to resolve. If you’re having problems repairing a mistake, it’s possible that your system is partly broken. Restoro is a tool that will scan your computer and determine the source of the problem. To download and begin mending, go here.
We advocate this approach since such apps are intended to wipe all traces of the deleted piece of software from all folders and the registry, in addition to uninstalling the program (which you can do yourself via the Control Panel).
4. Make all services automated.
- Type services.msc by pressing Windows Key + R. Click OK or press Enter.
- The following services may be found:
- BITS is an acronym for “bits and pieces (Background Intelligent Transfer Service)
- Windows Update Service is a program that allows you to update your
- Service for Cryptography
- To access the Properties of any of these services, double-click on it.
- Locate the Startup type and change it to Automatic. To save your changes, click Apply and OK.
- Rep the procedure for each of the three services.
- Try installing Windows 10 again after restarting your PC.
The problem should be fixed after activating all of these services, and you should be able to install Windows 10 without any problems.
5. Remove your WiFi adapter and unplug any USB devices from your PC.
Some people claim that disconnecting all USB devices solves the problem, so that’s something you should try. This includes your printer, phone, and external hard drive, among other things.
Instead of using a USB keyboard and mouse, try utilizing a PS/2 keyboard and mouse.
Also, if you’re attempting to install Windows 10 on a machine with a specialized WiFi card, you may want to take it off.
Only do this if you understand how it works or if your equipment is still under warranty. If one is available, contact the authorised repair shop.
6. Turn off your graphics or network card.
If you receive the error Installation Failed in Safe OS Phase With an Error During Apply image Operation when installing Windows 10, it’s possible that the issue is caused by your dedicated graphics card.
Users claim that your graphics card may not be entirely compatible with Windows 10, and that the only way to fix it is to deactivate it in BIOS.
To do so, you must first enter BIOS when your computer is booting. There are various methods for doing so, and if you’re not sure how to do so, see your motherboard handbook for complete information.
You must locate and deactivate your dedicated graphics card after you have entered BIOS. If you’re not sure how to accomplish it, look for thorough instructions in your instruction manual.
You may need to connect your display to the onboard graphics on the rear of your PC after the dedicated graphics have been removed. Try reinstalling Windows 10 to see if the problem occurs.
Several people stated that turning off their dedicated graphics solved their issue, so give it a go.
Your network card, in addition to your graphics card, may be the source of the issue.
If you’re accessing the Internet through a built-in network card, make sure it’s off in BIOS and see if that helps.
7. Make a BIOS update.
When you attempt to install Windows 10, you can encounter an error notice that says “Installation Failed in Safe OS Phase With an Error During Apply image Operation.” The issue might be due to your BIOS.
This problem might be caused by an old BIOS, and the only way to correct it is to flash your BIOS and install the most recent version.
Updating your BIOS is a complex and very dangerous operation that, if done incorrectly, may result in irreparable harm to your computer.
Check your motherboard handbook for complete advice on how to correctly update the BIOS on your motherboard.
Several customers stated that changing their BIOS resolved the problem, so proceed with caution if you want to utilize this option.
8. Adding and removing RAM modules
Adding or removing RAM modules is another option to repair the Installation Failed in Safe OS Phase With an Issue During Apply image Operation error.
Several customers claimed that merely adding or removing one or two memory modules to or from their PC cured the problem. The installation proceeded easily after that.
Hopefully, one of our suggestions was beneficial in your case. We’d love to learn how you solved the issue, so please share your thoughts in the comments section below.
Are you still experiencing problems? Use this tool to fix them:
- Download this TrustPilot.com-rated PC Repair Tool (download starts on this page).
- To detect Windows faults that may be causing PC difficulties, click Start Scan.
- To repair faults with Patented Technologies, click Repair All (Exclusive Discount for our readers).
This month, 0 readers have downloaded Restoro.
Was this page of assistance to you?
Thank you very much!
There are insufficient details It’s difficult to comprehend Other Speak with a Professional
There are 6 responses to this post.
Watch This Video-
The “installation failed in the safe_os phase reddit” is a problem that can occur when installing Windows on a computer. The error is usually caused by a bad partition table.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”How do you fix the installation failed in the Safe_os phase with an error during boot operation?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A: If your installation failed, try the following steps.
1) Turn off Safe_os and hold in power for 4 seconds to turn it off
2) Connect your PS4 back into a working power outlet and reboot with safe mode turned on. The system will boot up without any other options available but you can still use this to fix things that may have gone wrong during install or unplugging from an incorrect outlet/cable when installing Homebrew files onto the console. 3) If previous step does not work then disconnect all cables except USB ports from the PS4 (this includes HDMI cable if applicable). This should reset everything and allow you to proceed through setup again normally”}},{“@type”:”Question”,”name”:”How do I fix a safe OS error?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A: A safe OS error is typically caused by viruses, malware or other such things. If youre experiencing this on your PC then its likely that a virus has invaded the system and there are a few steps you can take to fix it”}},{“@type”:”Question”,”name”:”How do I fix Windows installation failed?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A: The best way to fix this would be by trying a windows repair. You can also try doing a system restore.”}}]}
Frequently Asked Questions
How do you fix the installation failed in the Safe_os phase with an error during boot operation?
A: If your installation failed, try the following steps.
1) Turn off Safe_os and hold in power for 4 seconds to turn it off
2) Connect your PS4 back into a working power outlet and reboot with safe mode turned on. The system will boot up without any other options available but you can still use this to fix things that may have gone wrong during install or unplugging from an incorrect outlet/cable when installing Homebrew files onto the console. 3) If previous step does not work then disconnect all cables except USB ports from the PS4 (this includes HDMI cable if applicable). This should reset everything and allow you to proceed through setup again normally
How do I fix a safe OS error?
A: A safe OS error is typically caused by viruses, malware or other such things. If youre experiencing this on your PC then its likely that a virus has invaded the system and there are a few steps you can take to fix it
How do I fix Windows installation failed?
A: The best way to fix this would be by trying a windows repair. You can also try doing a system restore.
Related Tags
- 0xc1900101 the installation failed in the safe_os phase with an error during boot operation
- windows 10 installation failed in the safe_os phase with an error during replicate_oc operation
- the installation failed in the safe_os phase with an error during migrate_data operation
- the installation failed in the first_boot phase
- apply image operation error windows 10