This will be a step-by-step tutorial on how to connect your subwoofer to the back of your speakers. This should cover all the steps, from plugging in the correct cables and connecting it with an amplifier so you can hear those bass notes at maximum volume!
The “connect subwoofer to rear speakers without amp” is a question that I have been asked many times. The answer is, yes you can connect a subwoofer to your rear speakers without an amplifier.
We earn money from qualifying purchases made on our website as an Amazon Associate.
This article will teach you how to upgrade your car’s back speaker with an additional subwoofer. This is a step-by-step guide to make installation a lot simpler for you if you don’t have any expert experience.
Connecting a Subwoofer to Rear Speakers: Tools
Unboxing, connecting cables, and other operations will need the use of a few specialized instruments. The following are some of the tools you may require:
a pair of screwdrivers, a soldering iron, a flashlight, a connector, a wire cutter, and a speaker wire
Step-by-Step Instructions for Connecting a Subwoofer to Rear Speakers
Self-installing a subwoofer in your car is a terrific way to save time and money. We’ll attach your subwoofer to your rear speakers in this situation. In other words, we won’t be using an amplifier to connect the subwoofer to the automobile.
- The first step in effectively installing your subwoofer is to place it. Place the subwoofer beneath the rear seats or in the trunk to keep it safe. Although the rear of the car seems to be the optimum location for the subwoofer, the location is decided by the size of the vehicle and the sound impact you want to achieve.
- Connecting the amplifier that powers the subwoofer is critical at this point. As a power supply, connect the amp cable to the automobile battery.
- The cables must then be connected to the car’s engine. This stage may prove to be the most difficult for you, but if you follow the directions carefully, it should be simple. Look around the vehicle for a carpet edge that you can elevate. To get to the dashboard area, run the wire beneath the carpet.
- Check beneath the dashboard with the flashlight to determine if there is any room or hole through which the wire may flow. If you can’t discover a hole after a thorough inspection, look for a rubber seal that connects the wire to the engine and gently poke a hole in it. Because your hand may not be able to reach the wires at this stage, gently pull the wire through the opening into the main compartment using a hook tool.
- The next step is to connect the wires to the automobile battery after running them through the length from the rear to the engine compartment. The automobile battery’s purpose is to provide enough power for the subwoofer to operate. Connect the positive wire to the battery after gently trimming a little section of the wire end (approximately an inch or half an inch). The safety precaution of inserting less wire in this location to minimize wire melting in a short circuit is something to keep in mind. Try not to connect more than half an inch to the battery connector, as per the safety requirement.
- Next, connect the amp ground wire to an exposed metal near the subwoofer’s location. With the assistance of a bolt or broad head screw that can hold down the wire, secure it to the body of the bare metal with a crimp ring.
- Connect the remote to wires (most automobiles have a blue wire for this). Remote-on wires are always present near the ignition, and they assist in turning on the audio device while the ignition is turned on.
- To connect to the rear speaker, just look at the rear speaker cable and tap the audio signal from there. To attach the subwoofer cable to it, check the trunk to reveal the wires and peel the wire insulation. Although soldering may provide the greatest results, you may simply connect the wires using crimp connectors to avoid harming the cable.
- Ascertain that all connections have been correctly installed. To prevent untidy connections, pull all wires together and secure them with a wire tie after checking that all essential connections have been made. Cut any surplus wire using a wire cutter and wrap connections in crimp connectors if there is any.
- It’s time to connect the cables to the amp and the subwoofer now that you’ve successfully linked all of the essential wirings. Remove the power wire fuse and turn off the power. Next, connect all of the wires from the previous connections, such as the power wire, ground wire, and remote-on wire, to the relevant sources. Your rear speaker and subwoofer should get along swimmingly.
How to Connect a Subwoofer to a Pair of Rear Speakers Without Using An Amplifier
Subwoofers need a lot of electricity to function properly. Some subwoofers come with an amplifier built in from the manufacturer to meet these needs, while others don’t (you have to get an amplifier manually).
Here’s a step-by-step guide on hooking up a subwoofer to your rear speaker without using an amp.
- Disconnect the terminal of your automobile battery (Make sure the ignition is turned off before this process).
- Remove the fuse box to get access to the power port, which will be used to connect the subwoofer to a power source.
- To get access to the appropriate wire, remove the speaker from its permanent location. Make sure the speaker cables aren’t broken.
- Connect the subwoofer to the speakers using an adaptor. Without an amplifier, the adapters make this procedure a lot simpler.
- After connecting the adapter to the speakers through the relevant ports, the next step is to connect the subwoofer to the jack to connect the speakers and subwoofer together. The subwoofer should now operate wonderfully without an amplifier provided these procedures are done correctly.
How to Hook Up a Subwoofer to Speaker Outputs
Step 1: Verify the receivers’ and subwoofer’s specs to guarantee compatibility and needs. Although most receivers now have dedicated ports for subwoofer output, it’s important to double-check before connecting your subwoofer.
Step 2: Find the high-level audio output connection port. Connect the left and right audio channels to the front and rear of the subwoofer using two speaker cables (the regular way to connect subwoofers).
Step 3: Adjust the subwoofer’s audio output (bass emissions) by altering the filter to eliminate distortion and improve the audio. You may determine how the bass from the subwoofer should sound when it’s turned on by adjusting the filter.
Setting up this connection has the benefit of avoiding the problem of your speakers not functioning when the subwoofer is operating.
With a connected subwoofer that gives the additional bass impact, listening to music is a whole lot more enjoyable. Now you can listen to your audio output’s pounding low-frequency sound effects via your rear speaker.
Watch This Video-
The “how to convert a home subwoofer into a car audio subwoofer” is an article that will teach you how to do this.
Frequently Asked Questions
How do I connect my subwoofer to my speakers?
A: You need to choose the Speaker audio output from your Sound Settings menu.
How do I connect my subwoofer to my stereo speakers?
A: There are different options for connecting a subwoofer. You can use the included RCA cables, Audio In/Out ports on your TV or soundbar, 3.5mm audio cable (most computers come with one), you can plug in an AUX cord to the back of your computer and then plug that into any speaker, or lastly if you have multiple zone speakers throughout your home and only want music playing through them both zones at once check out our guide here
Can you plug a subwoofer into a surround speaker slot?
A: Unfortunately, many surround sound speakers do not have an extra subwoofer input on their wiring. If your receiver does not include this option and you want to connect a separate subwoofer or amplifier with the proper inputs, I recommend using speaker wire extension cables instead of audio adapters for better signal clarity.
- how to tap into rear speakers for subs
- how to connect a subwoofer to a car stereo with an amp
- subwoofer only has speaker wire inputs
- subwoofer connection types
- how to connect subwoofer to car stereo